Campus Closure
MITT campuses will close for the Winter Break on Tuesday, December 23 at 4:30 p.m., reopening on January 2. 
유학생에게 개방
연구 분야
숙련된 거래
자격 증명
인증서
프로그램 길이
1년 | 풀타임
가상 투어 열기프로그램 개요
CIP Code: 48.0508
MITT’s Industrial Welding certificate program helps students build a strong foundation of the knowledge and skills required to design and build products by cutting and joining materials using ferrous and non-ferrous materials. Students work independently or in teams using current welding and fabrication equipment to complete projects in a learning environment that simulates an industrial welding shop.
프로그램 주요 내용
- Industry-Driven Curriculum: Focuses on the fundamentals of welding and fabrication, including blueprint reading, safety, and the use of modern equipment.
- Hands-On Learning: Provides practical training in cutting, joining, and fabricating ferrous and non-ferrous materials in a simulated industrial environment.
- Career Readiness: Features MITT’s Bridging to Work workshops, equipping students with employability and professional skills for the welding industry.
- Apprenticeship Credit: Graduates may earn credit toward Level 1 of the Welder Apprenticeship program upon meeting specific criteria.
- Professional Partnerships: Affiliated with the Canadian Welding Association, Canadian Welding Bureau, and Apprenticeship Manitoba, offering networking and credential opportunities.
- Pathway to Skilled Trades: Prepares students for roles such as welder, metal fabricator, or welding inspector in various industrial settings.
- Safety Emphasis: Comprehensive training in workplace safety practices essential for the welding trade.
커리어 성과
- Welder
- Fabricator
- Welding Inspector
- Pipefitter
- Boilermaker
- Structural Welder
- Sheet Metal Worker
- Ironworker
- Millwright
- Underwater Welder
참가 요건
2025-2026
국내
매니토바주 고등학교 졸업장(또는 프로그램 시작일로부터 45일 이내에 수료 예정), 또는 이와 동등한 자격이 있어야 합니다:
- 12학년 수학(40S) 성적이 50% 이상 또는 이와 동등한 수준입니다.
- 12학년 영어(40S) 성적이 50% 이상 또는 이와 동등한 수준입니다.
국제
- 고등학교 졸업장(또는 프로그램 시작일로부터 45일 이내에 졸업 예정), 또는 이와 동등한 자격이 있어야 합니다.
- 해외 지원자는 일반적인 입학 요건 국가/커리큘럼에 따라 다릅니다. 또한 지원자는 다음과 같은 프로그램별 요구 사항을 충족해야 합니다:
- 수학 성적이 50퍼센트 이상 또는 이에 상응하는 고학년 수준입니다.
- 시니어 레벨의 제1외국어 문학에서 50% 이상의 성적을 받았거나 이에 상응하는 자격이 있어야 합니다.
- 모든 고등학교 성적은 동등한 매니토바 성적 척도로 변환됩니다.
2026-2027
국내
매니토바주 고등학교 졸업장(또는 프로그램 시작일로부터 45일 이내에 수료 예정), 또는 이와 동등한 자격이 있어야 합니다:
- 40대 수학 학점
- 40대 영어 학점
이 프로그램에 대한 성숙한 학생의 자격 및 요건은 다음 페이지에서 확인할 수 있습니다. 성숙한 학생 페이지.
국제
매니토바주 고등학교 졸업장(또는 프로그램 시작일로부터 45일 이내에 수료 예정), 또는 이와 동등한 자격이 있어야 합니다:
- 시니어 레벨 수학 코스에서 최소 50%의 성적을 받아야 합니다.
- 시니어 레벨 제1언어 문학 코스에서 최소 50%의 성적을 받아야 합니다.
추가 요구 사항
- 영어 능력 입증 (캐나다 외 지역에서 교육받은 경우).
자주 묻는 질문
This program is primarily taught in person during full-day sessions, with less than 10% of course content delivered online.
이 프로그램은 학생 성공 주간과 공휴일을 제외하고 10개월 연속으로 운영됩니다. 자세한 내용은 학사 일정을 참조하세요.
교과서 및 소모품
전체 교재 목록과 교재 정보는 다음 페이지에서 확인할 수 있습니다. 프로그램 정보 페이지.
노트북 요구 사항
이 프로그램을 수강하려면 티어 1 노트북을 지참해야 합니다. 자세한 정보 및 기술 사양은 노트북 및 기술 요구 사항 페이지.
No, the Industrial Welding program does not include a practicum. However, students gain hands-on experience in a simulated industrial welding shop using real-world equipment and project scenarios.
Students who meet requirements may be eligible for:
Apprenticeship Manitoba Credit:
- Level 1 in-school technical training
- 800 hours toward the Welder Apprenticeship program
To qualify, students must:
- Complete the program with a 70 per cent or higher average in trade subjects
- Gain employment in the welding industry
- 졸업 후 2년 이내에 견습생으로 등록하기
Canadian Welding Bureau (CWB) Certifications in:
- Weld Flat using GMAW
- Weld Horizontal using GMAW
- Weld Flat using FCAW
- Weld Horizontal using FCAW
These certifications increase job-readiness and industry credibility.
Yes, we offer campus tours. Explore our Campus Tour options
예, 자격을 충족하는 경우 재정 지원을 받을 수 있습니다. 재정 지원 옵션을 살펴보세요.
성공을 향한 첫걸음을 내딛으세요
이 프로그램에 대해 자세히 알아보기
이 양식을 작성하시면 채용 전문가가 연락하여 목표에 대해 논의하고 질문에 답변하며 다음 단계를 안내해드릴 것입니다.
산업용 용접
모든 코스
Welding Safety and Orientation (W-100) — 64 hours
This course introduces students to essential workplace safety practices for welding and industrial environments. Topics include health and safety regulations, workers' rights, WHMIS, and shop safety protocols. Students learn proper use of personal protective equipment (PPE), fire safety, fume and gas handling, and ventilation system functions to ensure respiratory health.Hand and Power Tools (W-110) — 100 hours
This course trains students in the safe selection, operation, and maintenance of hand and power tools used in welding and fabrication. Tools covered include grinders, drills, shear, iron worker, and measuring instruments. Students apply their skills through a hands-on metalworking project, reinforcing precision, tool handling, and safety techniques.Math and Science for Welders (W-120) — 43 hours
This course equips students with math and science skills essential for precision welding. Math topics include fractions, decimals, geometry, and trigonometry for accurate measurements and calculations. The science component covers metallurgy fundamentals, metal properties, and the effects of heat on materials, including distortion control.Introduction to Drawing, Symbols, and the Welding Process (W-130) — 64 hours
This course develops students' ability to read and interpret welding blueprints and technical drawings. Students learn to identify lines, views, and welding symbols while applying math skills to determine dimensions. Hands-on practice with real blueprints prepares students for industry expectations in accurate weld planning.Oxy-Fuel Welding (Theory) (W-140) — 43 hours
This course provides an overview of oxy-fuel welding, with a focus on oxy-acetylene processes. Students learn equipment setup, safety procedures, and welding and cutting techniques. Topics include oxy-acetylene cutting, brazing, plasma arc cutting, and carbon arc gouging, with an emphasis on safety devices and proper settings.Oxy-Fuel Welding (Lab) (W-150) — 100 hours
This hands-on course teaches students to safely set up and shut down oxy-acetylene equipment. Practical skills include achieving the correct flame, manipulating the weld puddle, and performing oxy-acetylene welding on various joints using filler rods. Students also develop precision in straight-line and shape cutting.Shielded Metal Arc Welding (SMAW) Theory (W-160) — 43 hours
This course covers the principles and safety practices of shielded metal arc welding (SMAW). Students learn about power sources, electrode selection, and proper manipulation techniques to achieve strong welds. The course also addresses common welding mistakes and how to prevent them.Shielded Metal Arc Welding (SMAW) Lab (W-170) — 100 hours
This practical course develops SMAW welding skills in flat, horizontal, vertical, and overhead positions. Students learn techniques for each position while focusing on avoiding defects such as porosity and undercutting. Hands-on training builds confidence in producing structurally sound welds.Gas Metal Arc Welding (GMAW) Theory (W-180) — 64 hours
This course provides an introduction to gas metal arc welding (GMAW), including safety practices, power sources, and equipment troubleshooting. Students learn about shielding gases, metal transfer modes, and electrode selection, with an emphasis on weld quality and contamination prevention.Gas Metal Arc Welding (GMAW) Lab (W-190) — 100 hours
This hands-on course teaches students to perform GMAW welding in flat, horizontal, vertical, and overhead positions. Training focuses on adapting techniques for each position, recognizing weld faults, and applying best practices to ensure high-quality welds in different settings.Flux Core Arc Welding (FCAW) and Metal Core Arc Welding (MCAW) Theory (W-200) — 42 hours
This course introduces wire-fed welding techniques, focusing on FCAW and MCAW processes. Students learn electrode selection, process advantages, and industrial applications. Safety considerations and operational differences between FCAW and MCAW are also covered.Flux Core Arc Welding (FCAW) Lab (W-210) — 100 hours
This practical course develops students' FCAW welding skills in flat, horizontal, vertical, and overhead positions. The course also covers MCAW techniques for flat and horizontal positions, emphasizing proper welding methods, quality control, and common fault prevention.Industrial Welding Capstone (W-220) — 100 hours
This capstone course prepares students for Canadian Welding Bureau (CWB) certification testing. Students refine their SMAW, GMAW, and MCAW welding skills, working toward earning up to eight CWB tickets. Hands-on training ensures readiness for professional certification and career advancement.